Table of Contents
Advertisement
F E AT U R E S - O P E R AT I O N S
Thermostat Control
1. Before setting the thermostat, allow heater to operate
and warm up the room. You need to turn the
Thermostat Control clockwise to the highest setting
(7) to start the heater.
2. When the desired temperature comfort level is
reached, lower the thermostat setting until the heater
stops operating. This is done by turning the
Thermostat Control counter-clockwise and select from
the 7 temperature levels (1-7).
NOTE: It is normal for the heater to cycle ON and OFF as
it maintains the preset temperature. To prevent the unit
from cycling, raise the thermostat to the highest setting
(7).
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN
OPERATION.
Oscillation (BHH7522MX only)
Press the Oscillation Button (
the oscillation feature.
NOTE: Please do not manually turn the heater on the
base. It is designed to turn only by motorized oscillation.
) to activate or stop
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap solution.
2. NEVER use abrasive or flammable solvents to clean
the unit.
3. After cleaning, be sure to completely dry the unit
with a cloth or towel.
4. Store heater in a cool, dry location.
5. It is recommended that you store the unit in its
original carton.
TIP: Over time, dust may accumulate on the front
grills. This can be removed by wiping the unit with a
damp cloth.
Advertisement
Table of Contents
