Test 360 Imaging™ On The Control Head - Humminbird 360 Imaging Installation Manual

3. Test 360 Imaging™ on the Control Head
It is important to confirm that you can deploy and retract the 360 Imaging™
transducer from the control head. You should also confirm that the Transducer
Deployment System is providing sonar returns to the display.
NOTE: Before you deploy the transducer, the steps in the previous section Set up 360
Imaging™ on the Control Head must be completed.
NOTE: The instructions in this section should be performed at slow speeds (0 to 7
mph), in calm, open water, in a large area that is far from shallow water, boats, or
other obstacles.
Confirm the 360 Imaging™ Sonar Operation
1. Press the VIEW key until the 360 Imaging™ View is displayed on the screen.
The Deploy 360 Sonar dialog box will display on the screen.
Installation - Set up the Control Head
Deploying from the 360 View
36