Functional Description; Switch Operation - Delta CL120 Instruction Manual

906992 - 08-10-02.qxd
20. Dispose of expended batteries properly. The
Delta ShopMaster
rechargeable, nickel-cadmium batteries. These
batteries must be recycled or disposed of properly.
Drop off expended battery packs at your local
replacement battery retailer, your local recycling
center, or at a Delta Service Center (see list on back
page of this manual). Applicable fees for the
collection and recycling of these batteries (in the
United States), have been paid to the RBRC
further information, call: 1-800-8-BATTERY.
FOREWORD
Your Delta ShopMaster Drill/Driver is designed to drill holes and drive
fasteners in various materials as indicated in the following chart:
SPEED
RANGE MILD STEEL ALUMINUM WOOD SELF-FEED BIT WOOD SCREWS
LOW
HIGH

SWITCH OPERATION

Squeeze trigger switch (A) Fig. 1, to
start motor. Release trigger to stop
motor. As the trigger is squeezed the
motor speed increases.
NOTE: A low volume, high
pitched tone may be heard
while the switch is in the
variable speed mode. This
is normal.
FORWARD/REVERSE
• Make sure trigger switch (A) Fig. 1, is in OFF position before attempting to
change direction of rotation.
• Push button (B) Fig. 1, toward left side of drill for FORWARD (clockwise)
rotation.
• Push button (B) Fig. 1, toward right side of drill for REVERSE (counterclock-
wise) rotation.
• Place button (B) Fig. 1, in center position to lock trigger switch in OFF
position.
8/9/02 4:07 PM Page 6
Battery Packs

FUNCTIONAL DESCRIPTION

MAXIMUM CAPACITIES
DRILLING
1/4"
1/4"
1/4" 1/4"
6
contains
™ . For
RBRC™ is a Trademark of the
Rechargeable Battery Recycling
Corporation.
DRIVING
3/4"
3/8"
B
A
Fig. 1
1/4"
#8