Front Direction Indicators; Rear Optical Unit - PIAGGIO Beverly Tourer 400ie Manual

Front direction indicators (03_35)

To replace the burnt bulb, remove the screws «G»
03_35

Rear optical unit (03_36, 03_37, 03_38, 03_39, 03_40)

To reach the rear light unit bulbs proceed as follows:
1. Remove the plastic cover «A» of the rear luggage rack.
2. Remove the screw «B».
3. Remove the screws «C» and the lateral panels of the fairings, paying attention not
to damage the retaining straps.
4. Remove the two screws «D» of the light assembly being tested and remove it.
03_36
To replace the rear light bulb «E» release the clip and take out the bulb holder.
To replace the stop light bulbs «F» take out the rubber bulb holders and slide off the
bulbs.
To replace the turn indicator bulbs «G» turn the bulb holder anticlockwise and extract
it. Now hold the bulb, press and turn it clockwise and extract it.
03_37
57