NGK CR7EKB
Electric characteristic
Electrode gap
0.7 ÷ 0.8 mm
Removing the air filter (03_11)
Proceed as follows:
Unscrew the nine fixing screws «A» and remove the air filter cover «B».
03_11
Air filter cleaning (03_12)
1. Wash the sponge with water and neutral soap.
2. Dry it with a clean cloth and small blasts of compressed air.
3. Impregnate the sponge with a mixture of 50% petrol and 50% specified oil.
4. Gently squeeze the filter element, let it drip and then refit it.
CAUTION
03_12
IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NECESSARY TO CARRY OUT
MAINTENANCE CONTROLS OF THE AIR FILTER TO AVOID DAMAGING THE
ENGINE.
43