What Happens If An Incorrect Cd Is Inserted - Eclipse CD5000 Owner's Manual

CD5000_ENG.book Page 37 Wednesday, December 7, 2005 6:22 PM
ATTENTION
• If the incorrect CD is inserted, an [ERR_ ]
("ERR" and error number) message will
appear for two seconds, after which the CD
will be ejected.
• If [ERR5] (the 5th time an error has
occurred) appears, [HELP] will appear, after
which the CD will be ejected. When [HELP]
appears, carry out the operations for an
ESN security lock out by following the
procedure in "What happens if an incorrect
CD is inserted?" on page 37.
• You must use the CD used for Key CD
programing; a duplicate CD may not work
properly.
What happens if an incorrect CD is
inserted?
After the 5th incorrect attempt, the
1
display reads [HELP]
seconds.
After the [HELP] message appears for
five seconds,
appear.
Press the [CD
2
the front panel.
Press the [FUNC] button, then the
3
button [6], and hold them for five
seconds.
After the [SEC] message appears for
two seconds, rolling code (six digit) will
appear.
for five
serial number will
] button to close
ESN security operating procedure
4
Press the [FUNC] button.
[DISC] flashes on the display.
You will have five more attempts to
insert a correct disc.
5
Insert the Key CD into the slot.
If the correct CD is inserted, an [OK]
message will appear for two seconds
and the CD will be ejected.
ATTENTION
• If an incorrect CD is inserted, an [ERR_ ]
("ERR" and error number) message will
appear for two seconds, after which the CD
will be ejected.
• This process cancels the protection of ESN
main unit.
● Note ●
If after 5 tries the correct Key CD is not
inserted, the display reads [CALL]; the
main unit must be returned to Eclipse
to be reset. In this case, please
contact your Eclipse
assistance.
Your Key CD can easily be forgotten.
Write the album name in a reminder
note (See page 93).
VIII
dealer for
37