Program Number; How To Update System Program; Connection - Furuno FR-1505 MARK-3 Series Service Manual

4.5 Program Number

1) The following summarizes the programs used in the system. The radar and RP programs are
stored on the flash ROM, and the ARP program on the PROM.
2) How to switch between English and Japanese Versions.
The following key operation can change the English menu to the Japanese one, and vice
versa.
Ÿ
Turn on the unit.
While pressing and holding down the HL OFF switch, press the [MENU] key five times.
¡
Select the language you want to use.
Board
SPU Board (03P9230)
RP Board (03P9259)
ARP Board (18P9004)
ARP Board (18P9007)

4.6 How to update system program

Radar System Program
The radar system program, stored onto the flash ROM U11 on the SPU board, is replaced by
following procedure.

Connection

The series port of a personal computer (PC) is connected to the J304 on the MAIN PANEL
Board.
Remove a rubber cap located at the bottom of front panel to gain access to J304.
PC
SERIAL POART
*D-SUB9P Connector
Program Number
03591521XX
03591551XX
ARP : 18590411XX
DSP : 18590421XX
18590271XX
3
TX RS232C
2
RX RS232C
5
GND
4
6
7
8
Method of Updating
Loading program with
a personal computer
Loading program with
a personal computer
Changing PROMS.
Loading program with
a personal computer
FR-1505MK3
INT Board(03P9252)
J304
1
RS232C RXD
2
RS232C TXD
3
GND
*XH4P Connector
FR2115-SME-46A
4-9
Remarks
ARP-17
ARP-10