Chapter 2: Set Up A New HX3
This page lists a quick outline of the steps you might take when setting up a new HX3. More instruction for each step is listed
later in this guide. Please refer to the HX3 Reference Guide for additional information and instruction.
Contact
Technical Assistance
Note:
Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the HX3, and components from electrostatic discharge.
Note:
Although the HX3 has no display or alphanumeric keypad, HX3 operating system screens can be viewed and
parameters manipulated using LXEConnect and ActiveSync on a connected desktop/laptop computer.
Quick Start - Assembly
1. Put the headset on.
2. Connect the headset cable to the
3. Connect the audio connector and battery connection cable to the battery.
4. Connect the audio connector and battery connection cable to the HX3.
if you need additional help.
audio connector and battery connection
1. Headset
2. To Battery
3. Audio Cable
4. To Headset Cable
5. Headset Cable
6. To HX3
7. Battery
cable.
2-1