Page 12
Remove Trigger Module Remove Ring Strap Module Replace Ring Strap Module Replace Trigger Module...
Page 13
Using the Start menu, select Start > Run and type warmboot in the text box. Press Enter. When the HX2 is booting, there may be small delays while the wireless client connects, applications launch, remote management completes and Bluetooth devices connect.
Connect the HX2 end of the cable to the connector on the bottom of the HX2. Connect the USB type A connector on the I/O cable to a USB port on a PC or laptop. ActiveSync starts automatically when the USB cable is connected.
Setting Up AppLock HX2 devices are shipped to boot in Administration mode. In this mode, the user has full access to the device and no password is needed. After the administrator completes the process below, the HX2 switches to end-user mode and restricts access to only the specified application(s).
Reference Guide for descriptions of these and other features. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.