Led Head - Oki OKIPAGE 10ex Maintenance Manual

3.3.3

LED Head

(1) Press the knobs on left and right sides and open the stacker cover assy 1.
(2) Open the hook section on the left side of the stacker cover and remove the LED head 2.
Note:
• Be sure not to touch directly or push on the SLA part of the LED head.
• Do not remove the LED cable 3 from the connector.
• Remove connector 4 and cable 3 together as an assembly from the LED head.
• After mounting the new LED head and resinstalling the cable, set drive time of the LED
head according to the marking on the LED head (see 4.2.1).
40718401TH Rev.5
(Seltoc Lens Array)
2
1
SLA
4
SLA
3
52 /