Taillamps, Turn Signal, Sidemarker, Stoplamps; And Back-Up Lamps - Chevrolet Cruze Owner's Manual

10-34 Vehicle Care
4. Remove the bulb from the bulb
socket.
5. Install the new bulb in the bulb
socket.
6. Install the bulb socket into the
headlamp assembly by turning
clockwise.
7. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.
Taillamps, Turn Signal,
Sidemarker, Stoplamps,

and Back-Up Lamps

Trunk Deck Inboard Taillamps
1. Open the trunk.
2. Remove the trunk deck trim
cover (1).
3. Remove the bulb socket (2) by
turning counterclockwise and
pulling straight out.