Taillamps, Turn Signal, Sidemarker, Stoplamps, And Back-Up Lamps - Chevrolet 2011 Aveo Owner's Manual

8. Install the socket into the lamp
housing by turning it clockwise.
9. Reconnect the wiring harness
connector at the rear of the bulb.
10. Reinstall the headlamp
assembly using the three bolts.
Taillamps, Turn Signal,
Sidemarker, Stoplamps,
and Back-Up Lamps
To replace a taillamp, turn signal
lamp, stoplamp, or back-up bulb:
1. Open the liftgate or trunk. See
Liftgate (Hatchback) on page 2 9
or Trunk on page 2 7.
Hatchback
Vehicle Care
Sedan
2. Remove the two screws and the
lamp assembly.
3. Turn the bulb socket
counterclockwise and remove
the socket.
4. Press the bulb in and turn
counterclockwise to remove it
from the socket.
10-33