Wiper Blade; Replacement - Chevrolet Cruze Owner's Manual

Replacement blades come in
different types and are removed in
different ways. For proper
windshield wiper blade length and
type, see Maintenance
Replacement Parts on page 11-14.
Caution
Allowing the wiper arm to touch
the windshield when no wiper
blade is installed could damage
the windshield. Any damage that
occurs would not be covered by
your warranty. Do not allow the
wiper arm to touch the windshield.
To replace the windshield wiper
blade:
1. Pull the wiper assembly (1)
away from the windshield.
2. Lift up on the plastic latch (2) in
the middle of the wiper blade
where the wiper arm attaches.
3. With the latch open, pull the
wiper blade (3) down toward the
windshield far enough to release
it from the J-hooked end of the
wiper arm.
4. Remove the wiper blade.
Allowing the wiper blade arm to
touch the windshield when no
wiper blade is installed could
damage the windshield. Any
damage that occurs would not
be covered by the vehicle
warranty. Do not allow the wiper
blade to touch the windshield.
Vehicle Care
5. Reverse Steps 1 3 for wiper
blade replacement.
10-31