Gas Line Location; Converting Gas Line To The Left Side - Travis Industries 564 Cleanface Installation Manual

Gsr2 fireplace
Table of Contents

Advertisement

22

Gas Line Location

NOTE: The shutoff valve is attached to the side of the fireplace. If using rigid pipe, the shutoff valve may
be removed from the cover plate and attached to the shutoff valve inside the fireplace.
Right Side Gas Line (Stock)
Left Side Gas Line
3" (77mm) Above Base
15 degrees
Framing
Opening

Converting Gas Line to the Left Side

ACCESSING THE AREA UNDER THE BURNER
If switching the gas line to the left side, see page 24 for accessing the area under the burner.
1. Disconnect the gas line from the shutoff valve (3/4" wrench). Gas line is located inside the fireplace
on the right side.
2. Remove the screw that holds the shutoff valve plate in place (1/4" nutdriver). Remove the shutoff
valve plate.
3. Remove the cover plate from the left side of the fireplace (it is held in place in the same fashion as
the shutoff valve plate). Attach it to the right side of the fireplace.
4. Attach the shutoff valve plate to the left side of the fireplace. Route the gas line to the left side and
re-attach the gas line to the shutoff valve. Make sure to leak test the entire gas line.
Travis Industries
Installation
8.5"
216mm
(for qualified installers only)
4141209
3" (77mm) Above Base
15 degrees
11.5"
Framing
293mm
Opening
100-01378

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

564 cleanface ss cf gsr2

Table of Contents