Table of Contents
Advertisement
54
General information
•
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend
that you unplug the power adaptor and
telephone line cord from the base for the
duration of the storm.
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed
with other household or commercial waste at the
end of its working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in
place to recycle products using best available
recovery and recycling techniques to minimise the
impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
Product disposal instructions for residential users
When you have no further use for it, please
remove any batteries and dispose of them and
the product as per your local authority's recycling
processes. For more information please contact
your local authority or the retailer where the
product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and
check the terms and conditions of the purchase
contract and ensure that this product is not
mixed with other commercial waste for disposal.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XA 5000 – Edition 1.1 – 17.10.05 – 7113
Technical information
How many telephones can you have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to
calculate the number of items which may be
connected to any other telephone line. Your BT
Freelance XA 5000 has a REN of 1. A total REN
of 4 is allowed. If the total REN of 4 is exceeded,
the telephone may not ring.
Only use the approved base mains power supply,
item code 005391.
Only use the approved charger mains power
supply (BT Freelance XA 5000 multiple packs
only), item code 021299.
Only use approved AAA NiMH rechargeable
batteries.
Switchboard compatibility
This product is intended for use within the UK for
connection to public telephone network and
compatible switchboards, which support tone
dialling and timed break recall. If in doubt please
consult your network service provider.
Switchboard external line access code
You may need to enter an access code (e.g. 9) in
order to get an outside line. So that the
switchboard has time to pick up an outside line,
you may also need to add a Pause after the
access code. A Pause lasts 3 seconds.
Advertisement
Table of Contents
