Download Print this page

Important Notes; Tools Required For Assembly - Life Fitness 8205 Assembly Instructions Manual

Cable cross over

Advertisement

Please note:
* Thank you for purchasing the LIFE FITNESS 8205 CABLE CROSS OVER. Please read these instructions thoroughly and
keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be
purchased from your LIFE FITNESS customer service representative at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may
result in serious injury.
2. Do not allow minors or children to play on or around this equipment.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distributor or call the LIFE FITNESS
STRENGTH customer service department at (800) 328-9714.
5. Consult your physician before beginning any exercise program.

IMPORTANT NOTES

Tools Required for Assembly

* Rubber mallet or hammer
* 3/4" wrench
* 9/16" wrench
* Ratchet with 3/4" and 9/16" sockets
* 5/16" Allen wrench,
* Adjustable wrench
* Tape measure
2

Advertisement

loading