Grandstream Networks GXP2130 User Manual page 36

To enable Quick IP Call Mode, go to phone's Web GUI->Settings->Call Features, set "Use Quick IP Call
Mode" to "Yes". Clicking on "Save and Apply" on the bottom of Web GUI page to take the change. To make
Quick IP Call, take the phone off hook first. Then dial #xxx where x is 0-9 and xxx<255. Press # or SEND
and a direct IP call to aaa.bbb.ccc.XXX will be completed. "aaa.bbb.ccc" is from the local IP address
regardless of subnet mask. The number #xx or #x are also valid. The leading 0 is not required (but it's OK).
For example:
•
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # or "SEND";
•
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # "SEND";
•
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # "SEND";
•
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3.
Note:
•
The # will represent colon ":" in direct IP call rather than SEND key as in normal phone call;
•
If you have a SIP server configured, direct IP call still works. If you are using STUN, direct IP call will
also use STUN;
•
Configure the "User Random Port" to "No" when completing direct IP calls.
GXP2130/GXP2140/GXP2160 USER GUIDE Page 34 of 49