Assembly - Ironman Fitness triathlon X-Class 610 Owner's Manual

1. Remove Front Protection Bar
Place a Styrofoam Block under the Main Frame (A01) for easier removal of the Front Protection
Bar.This bar may be discarded.
Loosen the Dome Nuts (B22) first and then the Bolts (B20) and Washers (B21) with the Hex Tool
(T01) provided. Keep these for the next step. Remove the front protection bar from the Main Frame.
2. Front Stabilizer Installation
Attach the Front Stabilizer (A09) onto the curve plate of the Main Frame (A01)
and align the bolt holes with 2 Bolts (B20), 4 Washers (B21)and 2 Dome Nuts
(B22).Tighten bolts with the Hex Tool (T01) provided.

ASSEMBLY

Styrofoam block
Tool:
(T01)Hex Tool with Phillips Screwdriver
(13mm/14mm)
13
Tool:
(T01)Hex Tool with Phillips Screwdriver
(13mm/14mm)
(B20) Bolt 3/8"x64mm 2PC
(B21)Washer3/8"x20x2.0T 4 PCS
(B22)Dome Nut 3/8"X17T 2PC
Hardware: