Assembly - Ironman Fitness Ironman Elliptical 125E Owner's Manual

Assembly

INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good
condition. Do not dispose of the packing material until the assembly is completed. Tools have
been provided for you to use when assembling this product.
Locate the hardware pack and identify the following parts required for assembly.
M8 Cap Nut(33)-4
3/8" Nylon Locknut(47)-4
M6X40mm Carriage Bolt(62)-4
M8x15 Screw (65)-8
19
13
14
10
15
10x13x14x15x17x19 Screw Driver
8X19 Arc Washer(34)-12
10*26*2.0 Washer(48)-4
6*13*1.0 Washer(63)-4
M5 Allen Wrench
5
M8X70mm Carriage Bolt(35)-4
3/8" Nylon Locknut(49)-4
M6 cap nut(64)-4
M5 Allen Wrench