Using Omnibook Plug-In Modules - HP OmniBook 4100 Reference Manual

Using OmniBook Plug-In Modules

The plug-in module bay can hold a CD-ROM drive, floppy disk drive, an LS-120 drive,
a DVD drive, a second battery, or a weight-saving module. This documentation
describes the modules that shipped with the OmniBook—the floppy disk drive and
CD-ROM drive. If you've purchased other accessory modules, refer to the accessory
documentation that accompanied them for instructions.
This section describes how to
♦
♦
♦
The floppy drive module can also be connected externally via the parallel port. If
Hint
you want to do this, you'll need to order the external floppy cable (HP F1473A). You
can order this online at http://www.hp.com/omnibook. This connector cannot be
used with other modules, even though the connectors fit.
Replace a plug-in module.
Insert or eject a floppy disk.
Insert or remove a CD.
Making Connections
Using OmniBook Plug-In Modules
1-63