Samsung RF265AARS RF266AARS RF26NBRS1RF265AABP RF266AABP RF26NBBP1RF265AAWP RF266AAWP RF26NBSH1RF265AASH RF266AASH Service Manual page 49

TROUBLESHOOTING
2) After changing to the option mode, fresh food compartment "0" , freezer compartment
"0" will be displayed. ( Basically fresh food compartment "0", freezer "0" would be set at
shipping process, but setting value could be changed for the purpose of improving
product at mass producing process.)
- If fresh food compartment "0" shows only, temperature reference value of freezer
compartment will be set and current freezer compartment temperature code will be
displayed on the freezer temperature display.
3) If freezer compartment "4" is set as below freezer compartment code after fresh food
compartment "0 is set, standard temperature of freezer compartment will be lower than
28.4 (-2.0°C).
(Refer to the picture "changing the freezer compartment temperature")
: If you wait for 20 seconds after completing the setting, MICOM will save the setting
value to the EEPROM and normal display will be returned and the option setting mode
will be canceled.
4) Option changing method as above is the same as all RF266/265** model.
5) By the same method as above, it is possible to control the fresh food compartment
temperature, water supply, ice-maker harvest temperature/time, defrost return time,
hysteresis by temperature, notch gap by temperature etc.
6) Option function is set in the EEPROM at shipping process in the factory.
You would better not to change the option of your own.
Completing the setting is that option function return to normal display after 20 seconds.
Do not turn off the appliance before returning to the normal display mode.
Option setting function exists in the other items.
We will skip the explanation of the other functions by the option because it is
associated with refrigerator control function and is not needed at SERVICE.
NOTE
(Please do not set the other options except above SERVICE Manual.)
Code
48
Reference Value