Table of Contents
Advertisement
B-1
SAFETY PRECAUTIONS
READ AND UNDERSTAND ENTIRE SECTION
BEFORE OPERATING MACHINE.
WARNING
• ELECTRIC SHOCK CAN KILL.
• Do not touch electrically live
part or electrode with skin or
wet clothing.
• Insulate yourself from work and
ground.
• Always wear dry insulating gloves.
• Do not operate with covers, panels or guards
removed or open.
---------------------------------------------------------------------
• FUMES AND GASSES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to
remove fumes from breathing
zone.
---------------------------------------------------------------------
• WELDING SPARKS can cause
fire or explosion.
• Keep flammable material away.
---------------------------------------------------------------------
ARC RAYS can burn.
• Wear eye, ear and body protec-
tion.
---------------------------------------------------------------------
SEE ADDITIONAL WARNING INFORMATION
UNDER ARC WELDING SAFETY PRECAUTIONS
AND IN THE FRONT OF THIS OPERATING MAN-
UAL.
---------------------------------------------------------------------
POWER-UP SEQUENCE
When the POWER WAVE
can take as long as 30 seconds for the machine to be
ready to weld. During this time period the user inter-
face will not be active.
DUTY CYCLE
The duty cycle is based on a ten-minute period. A
40% duty cycle represents 4 minutes of welding and 6
minutes of idling in a ten-minute period. Refer to the
technical specification section for the POWER WAVE
S500CEʼs duty cycle ratings.
OPERATION
®
S500CE is powered up, it
POWER WAVE
GRAPHIC SYMBOLS THAT APPEAR ON
THIS MACHINE OR IN THIS MANUAL
DANGEROUS
VOLTAGE
OPERATORS
MANUAL
EXPLOSION
®
S500CE
®
WARNING OR
CAUTION
POSITIVE OUTPUT
NEGATIVE OUTPUT
HIGH TEMPERATURE
STATUS
PROTECTIVE
GROUND
COOLER
OUTPUT
WORK
CIRCUIT BREAKER
B-1
Advertisement
Table of Contents
