Cylinder Head Removal - KYMCO SUPER8 50 Service Manual

7. CYLINDER HEAD/VALVES
CAMSHAFT HOLDER DISASSEMBLY
Take out the valve rocker arm shafts using a
5mm bolt.
Remove the valve rocker arms.
CAMSHAFT HOLDER INSPECTION
Inspect the camshaft holder, valve rocker
arms and rocker arm shafts for wear or
damage.
If the valve rocker arm contact surface is
worn, check each cam lobe for wear or
damage.
Measure the I.D. of each valve rocker arm.
Service Limits: IN:10.10mm replace if over
EX:10.10mm replace if over
Measure each rocker arm shaft O.D.
Service Limits: IN: 9.91mm replace if over
EX: 9.91mm replace if over

CYLINDER HEAD REMOVAL

Remove the camshaft. ( 7-3)
Remove the carburetor. ( 5-5)
Remove the exhaust muffler. ( 2-5)
Remove the carburetor intake manifold.
7-5
Rocker Arm Shaft
5mm Bolt
Camshaft Holder
Intake Manifold
SUPER8 50
Rocker Arm
Rocker Arm Shafts