KYMCO SUPER8 50 Service Manual page 80

7
. CYLINDER HEAD/VALVES
Remove the camshaft holder and dowel pins.
Remove the camshaft gear from the cam
chain and remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
IN : 26.038mm replace if below
EX: 25.407mm replace if below
Check each camshaft bearing for play or
damage. Replace the camshaft assembly
with a new one if the bearings are noisy or
have excessive play.
SUPER8
Camshaft Dowel Pins
Cam Chain
Camshaft Bearings
50
Camshaft Holder
Camshaft Gear
7-4