Carburetor Installation - KYMCO SUPER8 50 Service Manual

5
. FUEL SYSTEM

CARBURETOR INSTALLATION

Tighten the drain screw.
Install the carburetor onto the intake
manifold, aligning the tab on the carburetor
with the cutout in the intake manifold.
Tighten the intake manifold band screw.
Install the air cleaner connecting tube and
tighten the band screw.
Connect the throttle cable to the throttle
wheel on the carburetor.
Tighten the lock nut.
Connect the fuel tube and vacuum tube to
the carburetor.
Connect the auto bystarter wire connector.
Perform the following inspections and
adjustments:
-Throttle grip free play ( 3-3)
-Carburetor idle speed ( 3-5)
5-11
Connecting Tube Band
Throttle Cable
Lock Nut Adjusting Nut
Throttle Cable
Fuel Tube
Auto Bystarter Wire Connector
SUPER8 50