KYMCO SUPER8 50 Service Manual page 73

6. ENGINE REMOVAL/INSTALLATION
Loosen the drive belt air cleaner connecting tube
band screw and remove the connecting tube.
Remove the rear brake adjusting nut,
connector pin rear brake cable.
Remove the L/R side the rear shock absorber
upper mount bolts.
Remove the engine mounting bolt and move
the motorcycle forward to separate it from the
engine.
Support the motorcycle with a floor jack.
6-3
Air Tube Band
connecting tube
Adjusting Nut
Rear Shock Absorber Upper Mount Bolt
Engine Mounting Bolt
SUPER8 50
Engine Hanger
Bracket Bolt