Vlan Ports - HP PS1810 Management And Configuration Manual

Virtual LAN

VLAN Ports

Table 7-1. VLAN Configuration Fields
Field
Create VLAN
Create VLAN ID
Number of VLANs
VLAN Name
Delete VLAN
Set Name
Click Apply to save any changes for the currently selected VLAN. The changes take effect immediately.
VLAN Ports
Use the VLAN Ports page to view the Port VLAN ID that a port will assign to untagged frames that it
forwards, and to configure the port priority.
To display the VLAN Ports page, click VLANs > VLAN Ports in the navigation pane.
Figure 7-2. VLAN Ports Page
Table 7-2. VLAN Ports Fields
Field
Interface
PVID
Port Priority
7-2
Description
Select this box to create a new VLAN.
Specify the numeric VLAN Identifier from 2 to 4094 and click
Note:
VLAN ID 1 is pre-configured on the switch and is always named "Default." The default
VLAN cannot be deleted.
The current number of VLANs. Up to 64 VLANs can be created.
After the VLAN ID has been created using the previously described fields, you can apply a name
to it or delete it.
Delete VLAN
• To delete a VLAN, select
• To specify a VLAN name, select
Apply
. A VLAN name can have any case-sensitive combination of up to 32 alpha-numeric
characters and can contain '-', '_', and '.' (a-z, A-Z, 0-9,-,_, and .).
Description
Select the port on which to configure the VLAN settings.
The VLAN ID that this port will assign to untagged frames or priority-tagged frames received
on this port (range 1–4094, default = 1). The PVID is not user-configurable and always
corresponds to VLAN ID of the port's untagged VLAN membership. You assign ports to VLANs
on the VLAN Participation / Tagging page.
The PVID value displays as None if all the VLANs are configured as tagged on this port or if this
port is configured as the destination port in a port mirroring configuration.
Specify the default 802.1p priority assigned to untagged packets arriving at the port. A value of
0 indicates the lowest priority, commonly used for routine traffic, and 7 indicates the highest
priority, often reserved for application such as voice and video. (0–7, default = 0)
Apply
Apply
and click . The default VLAN cannot be deleted.
Set Name
, type a name in the VLAN Name field, and click
.
to create the VLAN