HP PS1810 Management And Configuration Manual page 42

Network Setup
Daylight Saving Time
Table 3-4. Daylight Saving Time Fields
Field
Daylight Saving Time
Start Time settings /
End Time settings
Offset
■
■
To view a summary of clock and DST information, click Status > Clock in the navigation pane.
3-8
Description
Select how DST will operate:
Disabled—
•
Recurring—
•
Non-Recurring—
•
forward to subsequent years).
Set the following to indicate when the change to DST occurs and when it ends.
When Recurring is selected as the DST mode, the following fields display:
Week—
•
Day—
•
Month—
•
Hours—
•
Minutes—
•
When Non-Recurring is selected as the DST mode, the following fields display:
Month—
•
Date—
•
Year—
•
Hours—
•
Minutes—
•
Specify the time amount of time in minutes to advance the clock during DST.
Click Apply to save any changes for the current boot session; the changes take effect
immediately.
Click the Refresh link above the page to re-display the page with current settings from the
switch.
No clock adjustment will be made for DST.
The settings will be in effect for the upcoming period and subsequent years.
The settings will be in effect for only one period (i.e., they will not carry
Set the week of the month, from 1 to 5, when the change to/from DST occurs.
Set the day of the week when the change to/from DST occurs.
Set the month when the change to/from DST occurs.
Set the hour of the day when the change to/from DST occurs.
Set the minutes in the hour when the change to/from DST occurs.
Set the month when the change to/from DST occurs.
Set the day of the month when the change to/from DST occurs.
Set the year in which these settings will take effect.
Set the hour of the day when the change to/from DST occurs.
Set the minutes in the hour when the change to/from DST occurs.