Time Zone - HP PS1810 Management And Configuration Manual

Network Setup

Time Zone

Time Zone
The Time Zone page is used to configure your local time zone. The switch must be configured to acquire
the time from an SNTP server. An acronym can also be assigned to a selected time zone. No time zone
is configured by default.
To display the Time Zone page, click Network Setup > Time Zone in the navigation pane.
Figure 3-3. Time Zone Page
Table 3-3. Time Zone Fields
Field
Time Zone
Acronym
■
■
To view a summary of clock and time zone information, click Status > Clock in the navigation pane.
3-6
Description
Select the time zone for your location.
Specify an acronym for the time zone. An acronym can have any case-sensitive combination of
up to four of the following characters ('a-z' 'A-Z' '0-9' '-' '_' and '.').
Click Apply to save any changes for the current boot session; the changes take effect
immediately.
Click the Refresh link above the page to re-display the page with current settings from the
switch.