HP PS1810 Management And Configuration Manual page 22

Status
Port Summary
Table 2-3. Port Summary Fields
Field
Port Summary
Interface
Physical Type
Port Status
AutoNeg Status
Link Speed
MTU
Port Statistics and Trunk Statistics
Note: The following statistics are collected for both individual port and for trunks.
Interface/Trunk
Received Packets w/o Error
Received Packets with Error
Broadcast Received
Packets
Transmitted Packets w/o
Errors
Transmitted Packets with
Errors
Collisions
Transmitted Pause Frames
Received Pause Frames
■
■
For instructions on configuring port settings, see
2-6
Description
List of physical and logical interfaces supported or configured on a particular platform.
Displays whether the port is operating in copper mode or fiber mode.
The physical status (up or down) of the link at the port.
Displays whether Auto negotiation is enabled or disabled on the port.
The physical speed at which the port is operating.
The Maximum Transmission Unit (MTU), also referred to as Max Frame size acceptable
on the specified port.
List of physical and logical interfaces supported on that platform.
The packet count received on the port with out any packet errors.
The packet count received on the port with errors.
The packet count for Broadcast packets received on the port.
The number of packets transmitted out of that port with out any packet errors.
The number of packets transmitted out of the port with packet errors.
The number of packet collisions.
The number of Ethernet pause frames transmitted. (This information is collected for ports
but not for trunks.)
The number of Ethernet pause frames received. (This information is collected for ports
but not for trunks.)
Click Clear to reset all statistics to their initial values.
Click the Refresh link above the page to re-display the page with the latest port information.
"Port Configuration" on page 4-1.