Table of Contents
Advertisement
1. Flue Damper
The flue damper must be in the fully opened position
(handle up toward the top of the fireplace) during op-
eration of the fireplace.
Before lighting the fireplace, verify fully open position
by looking up from the inside of the fireplace.
2. Outside Air
Refer to Figure 3.2 for location and operation of control.
The outside air kit supplies some combustion air for
your fireplace. It may help reduce the effects of nega-
tive air pressure.
Close the inlet to prevent cold drafts when the fireplace
is not being used
CAUTION! Outside air control handle may be warm.
Adjust before lighting fire.
3. Glass Doors
•
Glass doors are optional.
•
Refer to Figure 3.3 for how to properly use them.
FULLY OPEN
CORRECT
FULLY CLOSED
CORRECT
Figure 3.3
Operating Positions of Bi-fold Doors
10
PARTLY OPEN
INCORRECT
PARTLY CLOSED
INCORRECT
VCG Biltmore Series • SB100 Owner's Manual • 4013-304 • Rev A • 02/19/15
Advertisement
Table of Contents
