Sony PMW-EX3 Operating Instructions Manual page 21

1.
SHOT TRANSITION operation block
(page 83)
2.
TC/U-BIT/DURATION (time data
selection) button (page 71, page 100)
Viewfinder control panel
1
PEAKING
MIRROR IMAGE DISPLAY/BATT INFO
OFF ON
4
1.
PEAKING control (page 66)
2.
CONTRAST control (page 31)
3.
BRIGHT control (page 31)
4.
MIRROR IMAGE switch (page 32)
5.
DISPLAY/BATT INFO button (page 24)
6.
ZEBRA button (page 58)
Bottom
1
1.
Tripod receptacles
Note
Check that the size of the hole to use matches
the screw of the tripod. If they do not match,
the camcorder cannot be attached to the
tripod securely.
2 3
CONTRAST BRIGHT
ZEBRA
5
6
2
When attaching to a tripod
Use the supplied bottom plate to stabilize the
camcorder. Remove two screws from the
bottom of the camcorder and attach the
bottom plate using the two supplied screws
(M2×6).
Bottom plate
When attaching to the optional VCT-
SP2BP
Insert provided spacer into the tripod
receptacles near the lens mount, before
attaching to the VCT-SP2BP camcorder
shoulder support.
2.
Backup battery holder (page 154)
M2×6 screws
Spacer
Parts Identifications 21