Operator Panel - Oki MC352 Startup Manual

4
Check that [Add Destination] is
selected on the start screen and then
press .
OK
5
Press the to select [Direct Input] and
then press .
OK
6
Enter a destination fax number up to
40 digits using the ten-key pad on the

operator panel.

Reference
● For dialing functions such as hyphen, prefix and
flash, refer to the User's Guide > "Faxing - MC362,
MC562 AND ES5462 MFP only" > "Sending a fax from
the MFP" > "Advanced operation".
7
Check that [Enter] is selected and then
press .
OK
8
Press
M
ONO
Note
● You cannot use the
● If the <STATUS> key is pressed and
twice, the information is displayed on the display
screen.
Memo
● When you want to cancel the operation during the
transmission, press the <STOP> key on the operator
panel.
Reference
● In addition to inputting the destination directly, you can
use the speed dial list, group list, transmission histories,
reception histories, or One-Touch key pad to specify
the destination. For details, refer to the User's Guide
> "Faxing - MC362, MC562 AND ES5462 MFP only" >
"Managing the phone book".
● To load a landscape document, refer to the User's Guide >
"Operation" > "Loading document(s)".
● You can change the fax settings such as document size
and resolution as necessary. For details, refer to the
User's Guide > "Faxing - MC362, MC562 AND ES5462
MFP only" > "Sending a fax from the MFP" > "Advanced
operation".
● When you want to specify multiple destinations, refer to
the User's Guide > "Faxing - MC362, MC562 AND ES5462
MFP only" > "Sending a fax from the MFP" > "Advanced
operation".
- 39 -
to start transmission.
button.
C
OLOR
is pressed
Faxing
3