Table of Contents
Advertisement
The speakers cannot be adjusted if they have been
set to "No" or "None" in "Speaker Configuration".
"Subwoofer 2 Level" cannot be adjusted if
"Subwoofer" have been set to "1ch" in "Speaker
Configuration".
AccuEQ Room Calibration: Disable the sound field
set in the automatic speaker setting. The setting can be
separately set to each input.
This setting cannot be selected if the automatic
speaker setting has not been performed.
It cannot be set if headphones are connected or the
listening mode is Direct.
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect on
Dolby Digital and Dolby Digital Plus only.
Turning the unit to standby mode will set the setting
to "Off".
This function cannot be used if "Loudness
Management" is set to "Off".
Music Optimizer: Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input.
The setting is effective in the signals of 48 kHz or less.
The setting is not effective in the bitstream signals.
It cannot be set if the listening mode is Direct.
Re-EQ, Re-EQ (THX): Adjust the soundtrack that was
processed to enhance its high pitch range, in order to
make it suitable for home theater.
In Re-EQ, the following listening modes can be used: Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel,
DTS, DTS-HD High Resolution Audio, DTS-HD Master
Audio, DTS Express, DSD, and DTS Neo:X Cinema.
In Re-EQ (THX), the following listening modes can
be used: THX Cinema, THX Surround EX, and THX
Select2 Cinema.
Screen Centered Dialog: Height speakers are used to
move acoustic images such as dialogs from the center
speakers upward according to the height of the TV
screen. Acoustic images of the center speakers move
up as the set value is increased.
This item may not be available depending on the
selected listening mode.
This function cannot be used if headphones are connected.
This function cannot be used if "Height 1 Speakers
Type" is not set to "Front High".
14
Speaker Layout: You can give priority to surround back
speakers, height 1/2 speakers or wide speakers when
they are all connected.
Back+Height 1: Audio outputs from surround back
speakers and Height 1 speakers are given priority.
Back+Wide: Audio outputs from surround back
speakers and wide speakers are given priority.
Height 1+2: Audio outputs from Height 1 speakers
and Height 2 speakers are given priority.
"Back" and "Height 1": Displayed when Zone 2
playback is performed via Height 2/ wide speaker
terminals (ZONE 2 terminals) while surround back
and Height 1 speakers are connected. "Back" means
that audio outputs from surround back speakers are
given priority.
"Height 1" means that audio outputs from Height 1
speakers are given priority.
"Back" and "Wide": Displayed when speakers are bi-
amp connected, passive subwoofer is connected, or
Zone 3 playback is performed via Height 1 speaker
terminals (ZONE 3/Bi-AMP terminals) while surround
back and wide speakers are connected. "Back" means
that audio outputs from surround back speakers are
given priority. "Wide" means that audio outputs from
wide speakers are given priority.
"Back" and "Height 2": Displayed when speakers
are bi-amp connected, passive subwoofer is
connected, or Zone 3 playback is performed via
Height 1 speaker terminals (ZONE 3/ Bi-AMP
terminals) while surround back and Height 2
speakers are connected. "Back" means that audio
outputs from surround back speakers are given
priority. "Height 2" means that audio outputs from
Height 2 speakers are given priority.
Selectable items vary depending on the playing conditions
such as input source, speaker configuration etc.
The speakers cannot be selected if they have been
set to "None" in "Speaker Configuration".
This function cannot be used if "11ch Playback" is set
to "Yes".
This function cannot be used in the listening mode
which does not use surround back speakers, height
1/2 speakers or wide speakers.
This function may not be effective depending on the
selected listening mode or input source.
Step 3: Playing Back
Video:
Monitor Out: The video input signals input to the unit
will be converted by the unit when they are output from
the HDMI OUT jack to the TV so that their resolution can
match that of the TV used. Select the HDMI OUT jack to
be used for output.
Control Monitor: Select the main room TV or the
separate room TV for which the CEC link function is
enabled when HDMI connection between the unit and
the separate room TV is established by Zone function.
For details on Zone function, see the next section
"Using the multi-zone function".
Wide Mode: You can set the aspect ratio.
Picture Mode: You can adjust the image quality. "Cinema"
will automatically adjust the image to be suitable to watch
movie and "Game" suitable to play game. In "Standard",
the resolution will be changed but the image quality will
not be adjusted. In "Custom", "ISF Day" and "ISF Night",
you can adjust the brightness, contrast, hue and saturation
as desired. If you do not adjust the resolution and image
quality, select "Bypass".
"Video" cannot be selected if the input is "NET" or "USB".
Information:
Audio: Displays the audio input source, format, number of
channels, sampling frequency, listening mode, number of
output channels, and other audio information.
Video: Displays the video input source, resolution, signal
format, color tone, 3D information, Aspect, Picture Mode,
output, and other Video information.
Tuner: Displays the band, frequency, preset number, and
other tuner (radio) information.
Listening Mode: Select the listening mode from the
categories of "Movie/TV", "Music", "Game" and "THX".
It cannot be set when audio is played from the TV's speakers.
Hide quick links:
Advertisement
Table of Contents
