Remote Mode Setup; Exiting The Setup Wizard - Integra DTR-60.6 Basic Manual

3rd Step : Remote Mode Setup
Initial Setup

Remote Mode Setup

Preprograming remote will give you control
of other devices from AV receiver remote
Would you like to setup your remote to
control your devices? This may take a while
depending on what and how many you have
connected. You can always come back to remote
setup from setup "8-2 Remote Mode Setup".
Yes
No. Skip
In this step, you can enable operation of the other
components using the remote controller of the unit. When
the Remote Mode Setup start screen is displayed, select
"Yes" with the cursors and press Enter on the remote
controller. Follow the guidance to select the desired
Remote Mode button and in the keyboard screen, enter the
first three characters of the brand name of the device you
are going to program (e.g., "INT" for Integra) and search for
the remote control code. The guidance will also explain how
to set the remote controller.
4th Step : Network Connection
Initial Setup
Network Connection
Do you want to connect network connection?
It gives you network services that our AV
receiver support. If you wish to skip this step.
select "No. Skip".
Yes
No. Skip
You can check the network connection. When the Network
Connection start screen is displayed, select "Yes" with the
cursors and press Enter on the remote controller. If you
select "Yes" in the next screen, you can view the Ethernet
cable connection status.
10

Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected
and press Enter on the remote controller. Connection and
setting of the unit is now completed. See Step 3 and enjoy
your home theater.
HOM E Exi t
HOM E Exi t
Step 2: Setting Up