Table of Contents
Advertisement
Setting Cruise Control
Resuming
a Set
Speed
Suppose you set your cruise control
at a
desired speed
and then you apply the brake. This, of course, shuts
off
the cruise control. But you don't need to reset it.
1
A
CAUTION:
If you leave your cruise control switch on when
you're not using cruise, you might hit a button
and go into cruise when you don't want to. You
could be startled and even lose control. Keep
the cruise control switch OFF until you want to
use it.
1. Move the cruise control switch to ON.
2 . Get up to the speed you want.
3. Press in the
SET
button
at the end of the lever
and release it.
Once you're going about
25 mph (40 k m h ) or more,
you can move the cruise
control switch from ON
to WA for about a half
I
a second.
You'll go right back
up
to your chosen speed and
stay there.
Remember, if you hold the switch at R/A longer than a
half a second, the vehicle will keep going faster until
you release the switch or apply the brake. You could be
startled and even lose control. So unless you want to go
faster, don't hold the switch at WA.
2-43
Advertisement
Table of Contents
