Honeywell HRHM1041 User Manual page 119

2. On the User tab, click Add User. The Add User page opens.
3. On the Add User page, configure the following settings:
• User Name
• Reusable
• Password
• Confirm Password Re-enter the password.
• Memo
• User MAC
• Group
• Authority
4. Click Save to save your settings.
Enter a user name for the account.
Select the check box to allow multiple clients to access to the
DVR using the same user name.
Enter a password for the account.
Optionally, enter a brief description of the account.
Optionally, record the user's MAC address so that user can only
log in on a specific device on the network. If this field is left blank,
the user can log in on any connected device on the network.
Assign the user to a group (admin, user, or another group that you
have defined).
Assign privileges by selecting or clearing check boxes on the
System, Playback, and Monitor tabs.
Note By default, the user group is set up to allow a new user to
monitor live video from all cameras, play back recorded
video from all cameras, control PTZ cameras, view
information, manually control the DVR, back up files, and
adjust color settings. To assign additional privileges,
change the user settings on the Group tab.
Configuring System Settings | 119
800-19403 - A - 12/2014