Steam Block Temperature Adjusting - Sunbeam EM6910 Service Technician – Training Manual

Café series twin thermoblock espresso machine

Hide thumbs Also See for EM6910:

Instruction booklet (44 pages)

Table Of Contents

Table of Contents

C Below

Factory

Setting

170

Power

1. Switch off the Coffee Maker.

2. Activate and hold "Two Cup" button.

3. Activate and release the "Power" button.

• The "Two Cup Light" shall remain "ON".

4. Then release the "Two Cup" button.

• The "Two Cup Light" shall remain "ON" for 0.2 seconds after the

"Two Cup"

• After the "Two Cup Light" goes out as above after 0.2 Seconds

the previous setting will be displayed by one of the 5 Lights, this

will be indicated up to 5 seconds before automatically returning

to the Factory Setting if no action is taken.

5. Within 5 seconds press and release the required button by referring to

the sketch above to increase or decrease the Steam Block

Temperature.

• The new setting will now be indicated by the LED being

illuminated on the pre-activated button.

• To indicate that the setting has been changed correctly the Light

will flash and 2 beeps sound.

• The Coffee Maker will now go to start mode.

• If no push button is pressed within 5 seconds, the setting shall

return to the factory setting.

EM6910 Café Series Espresso Machine