Installing Grill To Cart - Wolf OG36-LP Technical & Service Manual

Installation Information
Install Grill to Cart
There is a Wolf portable grill cart available to fit each Wolf outdoor grill model. To install a grill on a cart:
1. Attach casters to bottom corners of cart (locking casters in front) using the nuts supplied with the casters.
2. Attach side shelves to cart (See copy of instructions below that are supplied with the side shelves).
3. Install trans-
former inside,
on cart floor
using the two
mounting
screws (provid-
ed in cart
body).
4. Extract screws
from front
inside flange of
cart. They will
be used later to
affix grille to
cart.
5. Place grill onto
cart, but leave
enough room at
the back to
make connec-
tion to trans-
former at right
rear of cart.
Then, after con-
nection to the
transformer is
made, slide grill
back until it is
fully engaged
on the cart.
6. With grill in
position, secure
grill to cart with
four screws
provided.
Mounting holes
in the upper
back corners of
the grill will
align with holes
in the cart.
Secure with two
screws.
Remove the
drip tray. Install
two screws that
were removed in step 4 through side mounting holes below the grill front panel and into the cart.
#814144 - Revision A - July, 2009
Outdoor Grill (OG) Series
Figure 2-9. Side Shelf Installation Instructions
2-10