ADT Safewatch QuickConnect Plus User Manual page 8

QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: ---------------------
To remotely arm in AWAY mode: --
To remotely arm in STAY mode: ---
To remotely bypass a zone: -----------
To remotely activate forced bypass: ------------
To remotely check system status: -
To hang up: ----------------------------------
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: --------------
To add a user code: ----------------------
To delete a user code
To turn Test mode on: ------------------
To turn Test mode off: ------------------
To use the defined AUX function: --
** Only the master code can be used to add or delete another user code.
[*]
:
(except Master Code)
Press and hold AUX key 2 seconds (4 beeps) +
+ [1]
+ [2]
+ [3]
+ [6] + zone no.
+ [6] + [#]*
+ [9]
+ FUNCTION + [63]
** + CODE + user no. (02-08)+ user code
** + CODE + user number (02-08)
+ TEST
+ OFF
– 8 –