Quick View Of System Functions - ADT Safewatch QuickConnect Plus User Manual

NOTE:
SECURITY FUNCTIONS
Checking system status: ---------------
To arm in STAY mode: -----------------
To restart exit delay: --------------------
To arm in AWAY mode: ----------------
To arm if Quick Arm is active: ------
To disarm system and silence alarms:
Note: During Entry Delay or when an Alarm Condition exists the system can be disarmed by entering the User Code. Entering the OFF
key is not required
To bypass a zone(s): ----------------------
To turn Chime mode on or off: ------
* Security code is not required if Quick Arm is active. Instead, press and hold down the STAY or AWAY key.
MESSAGE CENTER
To record a message: --------------------
To stop recording before end of 85 secs:
To play back a message: ---------------
To skip a message:
--------------------------- [✻]
To delete all messages:
VOLUME ADJUSTMENT
To adjust message playback/announcement volume:
To mute system announcements: --
To restore/unmute announcements:
SPEAKER PHONE OPERATION
To enter speaker phone mode: ------
To exit speaker phone mode: --------
To enable/disable (toggle) ringer: -
To return keypad to telephone mode
To flash (switch between two calls using call waiting):
*To return to first call wait at least two (2) seconds and enter AUX again.

QUICK VIEW OF SYSTEM FUNCTIONS

= Boxes represent the entering of your 4-digit user code.
STATUS
AWAY or STAY (hold down for at least 2 seconds)
FUNCTION + CHIME
FUNCTION + RECORD
FUNCTION + PLAY
-------------------- FUNCTION + DELETE
FUNCTION + VOLUME + OFF
FUNCTION + VOLUME + [3] or [6]
[#] + AUX
OFF
[#] + VOLUME + AUX
(after clearing an alarm or trouble or disarming the system):
* + STAY
* + STAY OR STAY
* + AWAY
+ OFF
+ BYPASS + 2-digit zone number(s)
OFF
(during message replay)
FUNCTION + VOLUME + [3] or [6]
*
AUX
– 7 –
(only if programmed and
system armed in Stay mode)
[#] + AUX