Adjusting The Sound - Turtle Beach Elite 800X User Manual

Adjusting the Sound

If you want to...
Adjust game/media volume.
Adjust chat volume.
Turn the microphone on or off.
If you want to...
Select Microphone Presets.
Turn Active Noise Cancelling
on or off.
Then
Use the Game Volume Up/Down buttons on the left earcup of the Headset.
Use the Chat Volume Up/Down buttons on the right earcup of the Headset.
Press the Mic Mute Button on the Headset. A high tone in the Headset will confirm
Microphone On. A low tone will confirm Microphone Off.
Then
The Headset features built-in microphones and powerful digital signal processing to
optimize the sound for different environments. Press and hold the Mic Mute button to cycle
through the mic presets.
Your selection will be confirmed by a voice prompt in the Headset.
Quiet Room. For a quiet room with no outside noise distractions. This setting features the
widest field of voice pickup and natural voice fidelity.
Normal Room. Block out normal room noises: air conditioning, fridge humming,
conversations in other rooms, etc.
Loud Room. Block out louder room noises: ceiling fan, music in other rooms, conversations
in the same room, etc.
Outdoor. Focus voice pickup around your mouth—like holding an inline mic right up to your
mouth. Reduce the pickup of other sounds when talking outdoors.
NOTE: These descriptions itemize the modes available using the initial firmware version for
the Elite 800X. Upgraded or personalized headsets may have additional or revised modes not
shown here.
Press the Power/ANC Button on the Headset. A voice prompt in the Headset will confirm
your selection. In addition, the Headset Power LED will turn Orange when ANC is on and
turn Green when ANC is Off.
NOTE: You can only turn Active Noise Cancellation on or off when the Elite 800X Headset
itself is turned on.
Go to Table of Contents
18