Color Registration Error Correction Test - Oki MC-860 / CX2633MFP Service & Troubleshooting Manual

2.7.4 Color Registration Error Correction Test

This self-diagnostic menu is used for adjustment and to investigate cause of the color
registration error of the MFP.
1. Enter the self-diagnostic mode (Level 1) and press the
is displayed in the top of the screen.
[TEST PRINT]
2. When the is pressed, the following message is displayed.
(6) key
Press the or
(2) key (8) key
3. When the is pressed, test of the item that is being displayed on the panel is
(6) key
implemented.
<< When
REG ADJ EXECUTE
• The color registration correction test is implemented. (The
blinks.)
• When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
lower column of the display window.
When the is pressed, test results are incremented and displayed in order.
(2) key
When the is pressed, test results are decremented and displayed in order.
(8) key
When the is pressed, screen returns to the item 2 status.
(4) key
• When the
(#) key
lamp lights) and screen returns to the item 2 status.
[ON LINE]
<<
REG ADJ RESULT
The key operations are the same as those above.
<< When
BLT REFLECT TEST
• The color registration error correction belt reflection test is implemented. (The
lamp blinks.)
[ON LINE]
• When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
column of the display window.
The key operations are the same as those above.
until the desired item is displayed.
is executed >>
is pressed while the test in progress, the test is interrupted (the
is executed >>
is executed >>
or
(2) key (8) key
[ON LINE]
is displayed in the
**** RESULT
is displayed in the lower
**** RESULT
until
lamp
39