Stamina InMotion E-3000 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 4
Insert the UPRIGHT(68) into the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS
(M8x1.25x16mm)(59) and ARC WASHERS(M8)(77).
STEP 5
Insert the HANDLEBAR POST(71) into the UPRIGHT(68), and lock it in one of the adjustment holes with
ADJUSTMENT KNOB(69).
NOTE: There are three adjustment holes on the HANDLEBAR POST(71) for adjusting the height of the
HANDLEBAR(72).
STEP 6
Refer to the detail view A. Note the correct position of the HANDLEBAR(72), the HANDLEBAR(72)
should be assembled with a six degrees angle forward than the HANDLEBAR POST(71).
Attach the HANDLEBAR(72) to the HANDLEBAR POST(71) with HEX BOLTS(M6x1x33mm)(75), ARC
WASHERS(M6)(76), and NYLOCK NUTS(M6x1)(49). The HEX BOLTS(M6x1x33mm)(75) fit inside the
hex-shaped holes in the HANDLEBAR POST(71).
A.
hex-shaped
hole
8