Pen Calibration - Epson EB-770Fi User Manual

• To turn on the pen, move the pen.
• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the
black section near the tip of the pen.
• To write or draw on the projection surface in built-in Annotation mode or built-in Whiteboard mode, do
the following:
• To select a projected item, such as an icon, tap the projection surface with the pen tip.
• To draw on the projected screen, tap the projection surface with the pen and drag it as necessary.
• To move the pointer, hover over the surface without touching it.
• To use the pen as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the button on the side or press and hold the pen on the screen.
• To click and drag, tap and drag with the pen.
Parent topic:

Pen Calibration

Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate
the first time you use your projector's interactive features. Calibration results remain until you calibrate
again.
If you notice positioning discrepancies after doing any of the following, calibrate again:
• Adjusting the image size
Using the Interactive Pens
210