Wireless Settings - TP-Link TL-WA901ND User Manual

4.6.1 Wireless Settings

Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 4-12).This page allows you to configure the wireless
mode for your device. Six operation modes are supported here, including Access Point,
Multi-SSID, Client, WDS Repeater, Universal Repeater and Bridge with AP. The available
setting options for each operation mode are different from those of the other.
1) Access Point: This mode allows wireless stations to access this device.
Wireless Network Name - Identifies your wireless network name. Create a name up to 32

characters and make sure all wireless points in the wireless network with the same SSID. The
default SSID is TP-LINK_AP_XXXX (XXXX indicates the last unique four characters of each
device's MAC address). This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - Select your region from the pull-down list. This field specifies the region where the

wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
TL-WA901ND
Figure 4-11 Wireless menu
Figure 4-12 Wireless Settings in Access Point mode
450Mbps Wireless N Access Point User Guide
29