Disassembly And Assembly Instructions; To Remove Front Plate; To Remove Cabinet - Panasonic WH-SHF09F3E5 Service Manual

17. Disassembly and Assembly Instructions

High Voltage are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.

17.1 To Remove Front Plate

Please follow the steps below for take out front plate. Before removing the front plate of indoor unit, always
switch off all power supply (i.e. indoor unit power supply, heater power supply and boiler tank power supply).
1 Remove the 2 mounting screws which located at bottom of the front plate and 1 mounting screw at the front
of the plate.
2 Gently pull the lower section of the front plate towards you to remove the front plate from left and right hooks.
3 Hold the left edge and right edge of front plate to lift up front plate from hooks.
When reinstalling the
front plate, first set the
2 hooks, which located
at the top of front plate,
into the slots at cabinet.
Then carry out above
steps in the reverse
order.

17.2 To Remove Cabinet

1 Remove the 13 mounting screws on the left, right and top side of the cabinet.
2 Gently remove the side cabinet by holding both of the handles.
WARNING

Screws
Fix the left and right hooks to cabinet
slot properly when reinstall front plate.
124
Hook

Lift up