17. Disassembly and Assembly Instructions
High Voltage are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
17.1
To Remove Front Plate
1. Remove the 2 mounting screws which located at bottom of the
front plate.
17.2 To Remove Pressure Gauge
1. Remove 2 screws.
WARNING
2. Gently pull the lower section of the front plate towards you to
remove the front plate from left and right hooks.
Lift up
3. Hold the left edge and right edge of front plate to lift up front
plate from hooks.
2. Use spanner to release nut of pressure gauge
194
Hook