Mounting In A Plenum Space; Verify That Your Small Cell Is Operating Correctly - Cisco 7330 Quick Start Manual

Mounting in a Plenum Space

To mount your small cell in a plenum space, you have two
options:
1. Connect the suspended ceiling bracket to a secure location
in the plenum space and then connect your small cell to the
suspended ceiling bracket as described in
Suspended Ceiling, page
Step 4 to
2. Connect your small cell to the suspended ceiling bracket as
described in
Existing Bracket. Then connect this to another bracket as
described in Access Point Mounting Instructions:
http://www.cisco.com/en/US/partner/docs/wireless/
access_point/mounting/guide/apmount.html.
6
Verify that Your Small Cell is
Operating Correctly
The LED display is located on the front of your small cell. Note
the color and activity of the LEDs and refer to this table to
diagnose any problems that you may be experiencing.
Step 6.
Mounting on a Suspended Ceiling Using an
13: perform Step
Mounting on a
1, Step 2 and
19