Mounting On A Suspended Ceiling Using An Existing Bracket - Cisco 7330 Quick Start Manual

Mounting on a Suspended Ceiling Using an
Existing Bracket
If you have an existing Low-Profile AP bracket
(AIR-AP-BRACKET-1) attached to a suspended ceiling that you
want to use for your Cisco USC 7330, perform this task:
Connect the suspended ceiling bracket to your small
Step 1
cell as described in
page
Screw the four metal feet into the four corresponding
Step 2
holes on the bottom of the suspended ceiling bracket.
The rubber feet attachments are not required.
16
13: perform Step
Mounting on a Suspended Ceiling,
1, Step 2 and Step 4 to Step 6.